Wingtip Strobe LED Light
Gliders operate in an environment full of danger, and being seen, not sorry is the key to a fun glider flight. The GliderBurst was derived cleverly from the PowerBurst to become the most popular glider light in the world.
NOT APPROVED FOR INSTALLATION ON CERTIFIED AIRCRAFT
Functions:
| Dimensions (mm) | 115 mm x 33 mm x 26 mm |
| Dimensions (inches) | 4.539” x 1.308” x 1.024” |
| Weight | 64 g / 2.25 oz |
| Operating Voltage Range | 9–36 VDC |
| Input Current (peak) | 2.06 A @14 V 0.91 A @28 V |
| Input Power (peak) | 28.8 W @14 V 25.5 W @28 V |
| Repetition Rate of Strobe | 50 cycles per minute |
| Recommended size of mounting screw | M3, stainless steel recommended. Length depends upon placement location on wing tips. |
| Ambient Temperature | -40°C to +85°C -40°F to +185°F |
| Overheat Protection | Yes |
| Reverse Polarity Protection | Yes |
| Transient Voltage | 60 V / 2 s |
| Under-Voltage Protection | Yes |
| Over-Voltage Protection | Yes |
| Waterproof, Dust-proof, Shock-proof, Vibration-proof | Yes |